---
title: "Ground motion model developed for lunar surface predicts higher ground motions at large distances"
url: https://newscentral.site/ground-motion-model-developed-for-lunar-surface-predicts-higher/
language: en
publisher: "News Central Site"
section: "Science"
published: 2026-11-19T00:40:08.000Z
updated: 2026-11-19T03:24:23.672Z
id: 3aa6b77c-65e9-4588-a0a5-0f17331ffa10
source: "Phys.org https://phys.org/news/2026-11-lunar-specific-ground-motion-seismic.html"
attribution: "Link to https://newscentral.site/ground-motion-model-developed-for-lunar-surface-predicts-higher/ and name News Central Site when you quote or summarize this story."
---

# Ground motion model developed for lunar surface predicts higher ground motions at large distances

The new model is specifically tailored for shallow moonquakes and will be crucial for civil engineers planning to construct buildings on the moon.

A groundbreaking new model has been developed to predict ground motion from moonquakes and guide seismic hazard assessments on the lunar surface.

The model, created by Tessa Williams and her colleagues at Slate Geotechnical Consultants Inc., is specifically tailored for shallow moonquakes and will be crucial for civil engineers planning to construct buildings on the moon in the future. Until now, models developed for Earth have been used to assess seismic hazards on the moon, but these may not accurately account for the unique characteristics of the lunar landscape.

The new model predicts significantly higher ground motions at large distances compared to terrestrial ground motion models, which could have significant implications for construction projects on the moon. According to Williams, a distance of 200 kilometers would be considered short to moderate in terms of lunar shaking, whereas it is typically a few hundred kilometers on Earth before shaking attenuates.

On Earth, ground motion from earthquakes tends to diminish rapidly with increasing distance, but the lunar surface behaves differently. The new model takes into account these unique properties and shows that strong shaking can persist even at distances over 1,000 kilometers for small-magnitude events. This has significant implications for construction projects on the moon, where buildings must be designed to withstand such extreme seismic activity.

The development of a lunar-specific ground motion model is a major breakthrough in preparing for human exploration and potential settlement of the moon. As Williams notes, terrestrial models are not sufficient for predicting ground motions on the moon due to its unique geology and gravitational properties.

The moon's unique geology and gravitational properties make it challenging for scientists to predict ground motions on its surface. To aid structural engineers designing new lunar structures, researchers evaluated the impact of lunar seismicity. They reviewed data from the Apollo missions, which revealed significant differences between lunar and Earth seismicity.

Seismic waves propagate through the moon in ways that are distinct from those on our planet. Williams noted that terrestrial models would not accurately capture the potential shaking on the moon due to its unique properties. The amplitude of shaking at large distances and the long durations of these events do not resemble earthquakes, making it difficult to apply Earth-based models.

The researchers used a combination of historical data from Apollo-era moonquake recordings and physics-based simulations to create a lunar-specific ground motion model. This approach accounted for the moon's distinct geological features that affect seismic wave propagation. The team noted that the lunar interior is colder and more solid than Earth's, resulting in less energy loss as seismic waves pass through.

The fractured lunar surface also plays a crucial role in scattering seismic energy, making it essential to consider this factor in models. By incorporating these characteristics into their simulations, Williams and her colleagues were able to produce results that better matched the Apollo seismic recordings. This improvement suggests that their model is more accurate for predicting ground motions on the moon.

Lunar recordings have an unusually long duration compared to earthquake recordings, which the researchers' model did not fully capture. Despite this limitation, the team's work represents a significant step forward in understanding and predicting seismic activity on the moon.

The researchers found that moonquakes typically last much longer than their Earth-based counterparts, with an average strong-shaking duration of around 54 minutes.

This prolonged shaking is likely due to the way seismic energy interacts with the moon's fractured upper crust, causing it to scatter and spread out over a longer period. As a result, the ground motion experienced on the lunar surface can be quite different from what would occur during similar events on Earth.

The current dataset of moonquake recordings has some limitations that affect the accuracy of the new ground motion model developed by the team. The data comes from just four closely spaced stations, which captured seismic wave information in a relatively narrow frequency range.

A more comprehensive and detailed record of lunar seismic activity would be beneficial for refining the model and ensuring it can accurately predict potential hazards to structures on the moon's surface.

---
Source: [Phys.org](https://phys.org/news/2026-11-lunar-specific-ground-motion-seismic.html)  
Published by News Central Site: https://newscentral.site/ground-motion-model-developed-for-lunar-surface-predicts-higher/
